深圳市凯士比阀门有限公司

网站首页 > 产品展示 > 进口水泵 > 进口隔膜泵

    进口铸铁气动隔膜泵

    • 产品型号
    • 公称通径
    • 公称压力
    • 产品材质
    • 产品价格
    • 产品品牌德国汉克(HANK)

    本公司专业代理、销售、供应德国汉克(HANK)进口铸铁气动隔膜泵产品,最新最全的优质进口铸铁气动隔膜泵品牌厂家推荐,欢迎来电洽谈与合作,咨询热线:0755-61280628。

    1. 详细信息
    进口铸铁气动隔膜泵是一种新型输送机械,是目前国际最新颖的一种泵类。采用压缩空气为动力源,对于各种腐蚀性液体,带颗粒的液体,高粘度、易挥发、易燃、剧毒的液体,均能予以抽光吸尽。德国汉克(HANK)目前已形成系列化生产,共有八种规格直径: ø10mm(3/8")、 ø15mm(1/2")、 ø25mm(1")、 ø40mm(11/2")、 ø50mm(2")、 ø65mm(21/2")、 ø80mm(3")、 ø100mm(4")。根据不同液体介质分别采用丁晴橡胶、氯丁橡胶、氟橡胶、聚四氟乙烯。以满足不同用户的需要。德国汉克(HANK)生产的气动隔膜泵已被国内一千多家石油、化工、电子、陶纺织系统单位采用,安置在种特殊场合,用来抽送各种常规泵不能抽吸的介质,均取得了满意的效果。
    主要特点
    1、不需灌引水,吸程高达7m,扬程达50m,出口压力≥6kgf/cm2;
    2、流动宽敞,通过性能好,允许通过最大颗粒直径达10mm。抽送泥浆、杂质时,对泵磨损甚微;
    3、扬程、流量可通过气阀开度实现无级调节(气压调节在1-7kgf/cm2之间);
    4、该泵无旋转部件,没有轴封,隔膜将抽送的介质与泵的运动部件、工作介质完全隔开,所输送的介质不会向外泄漏。所以抽送有毒、易发挥或腐蚀性介质时,不会造成环境污染和危害人身安全;
    5、不必用电,在易燃、易爆场所使用安全可靠;
    6、可以浸没在介质中工作;
    7、作用方便、工作可靠、开停只需简单地打开和关闭气体阀门,即使由于意外情况而长时间无介质运行或突然停机,泵也不会因此而损坏,不旦超负荷,泵会自动地停机,具有自我保护性能,当负荷恢复正常后,又有自动启动运行;
    8、结构简单、易损件少,该泵结构简单,安装、维修方便,泵输送的介质不会接触到配气阀,联杆等运动部件,不象其他类型的泵因转子、活塞、齿轮、叶片等部件的磨损而使性能逐步下降;
    9、可输送较粘的液体(粘度在1万厘泊以下);
    10、无须用油润滑,即使空转,对泵也无任何影响,这是该泵一大特点。
    主要用途
    1、泵吸花生酱、泡菜、土豆泥、小红肠、果酱苹果浆、巧克力等。
    2、泵吸油漆、树胶、颜料。
    3、粘合剂和胶水、全部种类可用泵吸取。
    4、各种瓦、瓷、砖器及陶器釉浆。
    5、油井钻好后,用泵吸沉积物及灌浆。
    6、泵吸各种乳剂和填料。
    7、泵吸各种污水。
    8、用泵为油轮,驳船清仓吸取仓内污水。
    9、啤酒花及发酵粉稀浆、糖浆、糖密。
    10、泵吸矿井、坑道、隧道、选矿、矿渣中的积水。泵吸水泥灌浆及灰浆。
    11、各种橡胶浆。
    12、各种磨料、腐蚀剂、石油及泥浆、清洗油垢及一般容器。
    13、各种剧毒、易燃、易挥发液体。
    14、各种强酸、强碱、强腐蚀液体。
    15、各种高温液体最高可耐150℃。
    16、作为各种固液体分离设备的前级送压装置。
    Cast iron pneumatic diaphragm pump is a new type of transport machinery, is currently the most innovative of a class of pumps. The use of compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid, can be exhausted. HANK has a series of production sizes: ø10mm (3/8 "), ø15mm (1/2"), ø25mm (1 "), ø40mm (11/2"), ø50mm (2 "), ø65mm (21/2"), ø80mm (3 "), ø100mm (4"). According to different liquid media were used Dingqing rubber, chloroprene rubber, fluorine rubber, PTFE. To meet the needs of different users. Germany Hank (HANK) production of pneumatic diaphragm pump has been more than 1,000 domestic oil, chemical, electronic, ceramic textile system units, placed in a special occasion, used to pumping a variety of conventional pumps can not smoke the media, are And achieved satisfactory results.
    Main feature
    1, without irrigation water, suction up to 7m, head up to 50m, the outlet pressure ≥ 6kgf / cm2;
    2, the flow of spacious, through the performance is good, allowing the maximum particle diameter of up to 10mm. Pumping mud, impurities, the pump wear is minimal;
    3, head, the flow through the valve opening to achieve stepless adjustment (air pressure adjustment between 1-7kgf / cm2);
    4, the pump without rotating parts, no shaft seal, the diaphragm will be pumping the media and the pump moving parts, the working medium completely separated, the transmission of the media will not leak out. So pumping toxic, easy to play or corrosive media, will not cause environmental pollution and harm to personal safety;
    5, do not have electricity, flammable, explosive use of safe and reliable place;
    6, can be immersed in the media work;
    7, the role of convenient, reliable, open only need to simply open and close the gas valve, even if the accident and a long time without media operation or a sudden shutdown, the pump will not be damaged, no overload, the pump will automatically To stop, with self-protection performance, when the load back to normal, there are automatic start running;
    8, the structure is simple, less wearing parts, the pump structure is simple, easy installation, easy maintenance, pump delivery media will not come into contact with the valve, connecting rod and other moving parts, unlike other types of pumps due to the rotor, , Leaves and other components of the wear and tear of the performance gradually decreased;
    9, can transport more viscous liquid (viscosity in less than 10,000 centipoise);
    10, without oil lubrication, even if the idle, the pump has no effect, which is a major feature of the pump.
    The main purpose
    1, pumped peanut butter, pickles, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.
    2, pumping paint, gum, paint.
    3, adhesive and glue, all kinds of pump can be pumped.
    4, all kinds of tile, porcelain, brick and pottery glaze pulp.
    5, the oil well after drilling, with pumping sediment and grouting.
    6, pumping a variety of emulsions and fillers.
    7, pumping a variety of sewage.
    8, with the pump for the tanker, barge clearance to absorb the sewage inside the warehouse.
    9, hops and baking powder slurry, syrup, sugar secret.
    10, pumping wells, tunnels, tunnels, mineral processing, slag in the water. Pumping cement grouting and mortar.
    11, all kinds of rubber pulp.
    12, all kinds of abrasives, corrosion agents, oil and mud, cleaning grease and general containers.
    13, all kinds of highly toxic, flammable, volatile liquid.
    14, all kinds of strong acid, alkali, strong corrosive liquid.
    15, a variety of high temperature liquid can withstand up to 150 ℃.

    16, as a variety of solid liquid separation equipment, the former pressure device.

    图片关键词

    进口水泵

    进口水泵

    德国汉克(HANK)进口水泵成立于1852年创建于门兴格拉德巴赫(Monchengladbach)是位于德国北莱茵-威斯特法伦州首府杜塞尔多夫市以西的一座城市。于19世纪50年代初德国经济快速发展,由于德国能源短缺,政府在节能方面加大力度,因此HANK(Trouble Less pump没有故障的水泵)公司成立。汉克水泵是以生产高品质、先进的水泵、测量及控制系统而享誉全球的跨国性生产企业,在全球几十个国家拥有子公司及分支机构,公司产品涉及用途:石油、化工、电力、冶金、制药、食品、水处理、市政给排水、天然气、造纸、电子工业、楼宇、机械设备配套等领域。

    GERMANY HANK PUMP LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Pump (Trouble Less Pump) was established.Hank pump is the world-famous transnational production enterprise,which produces high quality and advanced pump, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

    进口水泵厂家

    进口水泵厂家

    进口水泵厂家

    德国汉克(HANK)水泵的价值理念概括为:责任-远见-创新。我们因自身的责任感、远见及专注于创造前所未有的解决方案和理念,而成为全球领先的水泵制造商。
    The conclusion of the pump concept in German Hank pump is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of pump manufacturer in the global.

    标签:   气动隔膜泵 铸铁气动隔膜泵 进口铸铁气动隔膜泵