进口气动放料阀

进口气动放料阀主要用于反应釜、储罐和其它容器的底部排料、放料、取样和无死区关断操作。借助于阀门底部法兰焊接于储罐和其它容器的底部，因此消除工艺介质通常在容器出口的残留现象。德国汉克(HANK)气动放料阀设计新颖、结构合理，采用不锈钢、WCB等材质作阀体，密封性能良好。

1、使用介质如水、丙酮、酒精、氨、碳酸钡、苯（WCB材质的最低用温度为-29℃,最高温度为425℃。）

2、使用介质如颗粒、油品、纸浆、二氧化碳 气（不锈钢材质的最低使用温度为-100℃，最高使用温度为232℃。）

3、严禁使用含氟离子液体（如HF等）也不能用强碱及磷酸（温度＞150℃ 浓度＞30%）。

1、轻松转动手轮，将切换手柄推移到（分）指示牌，即可进行气动操作。

2、当气源进入电磁阀后，电磁阀自动开戾上（或下）输气口，电磁阀接通电源时，阀门自动开启，断电时阀门自动关闭。红色按钮为手动调试使用开关按钮。

3、当气源进入气缸上部时，将活塞推向下部，即关闭阀门。

4、当气源进入气缸下部时，将活塞推向上部，即开启阀门。

5、连续作业时，按上述作往返动力。

GERMANY HANK VALVE LIMITED is founded on 1852 in Monchengladbach,which is located at one city in North Rhine in Germany, which is the west of Nordrhein-Westfalen. At the beginning of 1850s, as the rapid development of economic and the shortages of energy in Germany , the government had been in saving energy aspect. On this occasion, HANK Valve (Trouble Less Valve) was established.Hank valve is the world-famous transnational production enterprise,which produces high quality and advanced valve, measurement and control system, and which has its divisions and branches in dozens of countries in the global. The company products user involves the petroleum, the chemical industry, the electric power, the metallurgy, the drugs manufacture, food, the water treatment, the municipal administration to give draining water, the natural gas, the papermaking, the electronics industry, the building, the mechanical device necessary ect..

德国汉克（HANK）阀门的价值理念概括为：责任－远见－创新。我们因自身的责任感、远见及专注于创造前所未有的解决方案和理念，而成为全球领先的阀门制造商。

The conclusion of the valve concept in German Hank valve is resposibility,foresight,innovation. For ourselves resposibility, foresight and focusing on creating unprecendented solution and concept,our company has become the lead of valve manufacturer in the global.